For growers on Sentek probes
How to read your Sentek or IrriMAX Live graph
Your IrriMAX Live graph adds the soil moisture from the sensors on your Sentek probe into one summed line, and the Full, Refill and Stress budget lines you set on that pane mark where the line should sit. When the last value drops below the Refill line IrriMAX Live raises an alert, each detected irrigation is coloured red for not enough, blue for too much or green for just right, and the time since last upload shown on every graph tells you when a logger has gone silent.
By AgWaterAI. Last updated: November 3, 2026.
The summed soil moisture line
A logger is the device in the field that uploads soil moisture and other data to IrriMAX Live, and every logger has its own database of readings, usually created the first time it uploads. A graph is a view of a selection of sensors from that database, and each pane on the graph can show a different type of sensor, or the same sensors in a different way.
The summed soil moisture pane adds the readings from the sensors it includes into one line, so one line stands for the whole depth the probe covers. IrriMAX Live sets its budget lines, runs its root activity detection and detects irrigations on that pane, which is why it is the pane to read first.
The Full, Refill and Stress lines you set
The three budget lines on the pane are yours. You can click within the pane to set the Full line and the Refill line, and IrriMAX Live raises an agronomic alert when the graph line drops below the Refill or Stress line, or goes above the Full line.
The Adaptive Irrigation Guide can set the Full and Stress lines for you from root activity in the current growth stage, or from the last 90 days of data if no growth stages are defined. Days where crop water use is less than half of the mean are classed as stress days; the full point is the highest soil water content of the non-stress days, the stress point is the lowest soil water content of the non-stress days, and the Refill line can be set a fixed fraction of the way from stress to full. With "Keep updating" on, the lines are recalculated whenever new readings arrive.
If you choose a soil type instead, IrriMAX Live sets placeholder lines: a per-sensor value multiplied by the number of sensors in the summed line becomes the full point, and the stress point is half of it. Its own help calls placeholder lines inaccurate and a temporary measure, so treat them as a stand-in until the lines are set from your own data.
If the summed graph has a daily ET pane beside it, IrriMAX Live can also detect the onset of stress for a growth stage from a start date you click. When detection succeeds it sets the Stress line and adds a comment that explains the reasoning.
A reading under the Refill line
When the last value on the pane is below the Refill line, IrriMAX Live generates the alert on its own. On your Home page the graph appears in the Irrigate section, which lists the loggers whose last value is below the Refill or Stress line and that have updated within the last 28 days.
On the graph item itself the moisture gauge at the top left sits in the red region and a triangular alert indicator appears at the top right; click it for more information, or to disable that alert. The same alert goes out in your daily alert email. Days of stress are also marked on the graph with a vertical bar, red if too dry or blue if waterlogged, the waterlogged mark being for heavy clay only.
An irrigation rated not enough or too much
IrriMAX Live detects irrigations on the summed pane. For an event to count as an irrigation, the rate of soil moisture increase must be significant, and the rise must register at the top sensor and extend continuously downward without missing a sensor.
Each detected irrigation is drawn as blue parabolic shapes descending from the top of the pane, with a colour at the top: red for "not enough", blue for "too much" and green for "just right". The colour is IrriMAX Live's own rating of that event; the help pages do not publish the rule behind it, so this page does not guess at one.
Read the rating together with the lines. The Refill alert keys off the last value, so if the summed line is still below the Refill line after the water went on, the alert stands whatever colour the event was given. Coloured horizontal bands on the same graph show days with root activity, and extend for a further 7 days before roots are considered inactive.
A silent logger
Every graph shows how long it has been since its probe last uploaded; the help page's own example reads "6.3y", meaning 6.3 years since the last upload. If the line simply ends, look at the time since last upload before you read anything into the last value.
The Irrigate section lists only loggers that have updated within the last 28 days, so a silent logger drops out of it even if its last value sat below the Refill line. In the folder view, "Sort by last update" puts the freshest graphs first and the quiet ones last, and "Hide if 28 days inactive" hides graphs whose last update was more than 28 days ago, which is useful for a clean screen and a trap if you forget it is on.
A spanner icon on a graph item means a fault has been raised. "Report a fault" on the Graph or Logger menu creates or updates a fault record for that logger and can send an email to the person responsible for servicing your equipment, and the Faults section of your Home page collects every logger with a technical alert or a raised fault.
An ended subscription
Subscriptions do not automatically renew. If you let one expire, the device or service tied to it is immediately prevented from uploading data, and renewing it before the expiry date is your responsibility.
When a subscription is due to expire within 14 days you see an expiration warning when you log in and receive daily warning emails, which stop when you renew or choose "Let it expire". Renewing an unexpired subscription adds the time you buy to the existing expiry date; renewing an expired one adds it to today's date. The subscriptions help page does not say what happens to readings already uploaded, so this page makes no claim about that.
What AgWaterAI adds on Platform
The IrriMAX Live API is, in its help page's words, intended for third-party services that need to import data from IrriMAX Live into their systems, and the account holder can set, change or clear the key on the Settings page.
Every Monday, the week on your probes in one email: what to do this week in order, which blocks to irrigate first, which to take a stem water potential (SWP) reading on, which to walk, the weather and ETo ahead, your water budget, the sensors that need attention, and what to trust this week. Thursday brings a draft water order your adviser makes the call on, where our agronomist’s past orders for your blocks are loaded into the draft’s rules. Probe readings are sealed into a signed record where daily sealing runs. You keep your probes, crew and adviser.
Platform: $20 per acre per year on your own probes, with your own crew and adviser. 20-acre minimum.
- The Monday list
- Once your blocks have a season of their own stem water potential (SWP) readings: which blocks to take a reading on first each week, from each block's own reading record. Every SWP reading your adviser takes sharpens the Monday list and the block’s record. A farm with no readings starts with the three-day soil projection on each probe, once the probe has logged a wetting.
- The Thursday draft order
- A Thursday draft needs our agronomist’s past water orders for each block loaded into its rules, so a farm without them does not get one, and it gives numbers only for the months those orders cover. A farm without them starts with the Monday briefing on its probes, the soil projection on each probe once the probe has logged a wetting, and the sealed record where daily sealing runs. On Platform, your own Certified Crop Adviser or adviser reviews the draft and makes the call. Nothing we send controls a pump or a valve.
- The sealed record
- Probe readings are sealed into a signed, tamper-evident chain once each logger day closes, on the sites where daily sealing runs today. Each issued water order is kept with the readings behind it; the order itself is not signed. A signature shows a record has not changed since signing; it does not prove a measurement was correct.
- Your probes stay yours
- Your IrriMAX Live account, probes and subscription stay as they are. Starting the Platform trial also starts our data terms. You keep ownership of your raw data. Clearing the key in IrriMAX Live stops data access. Cancelling the trial requires written notice under the trial terms.
Sources
Every statement about IrriMAX Live on this page was read on its public help pages on November 3, 2026. Where a help page does not state something, this page does not either.
Sentek and IrriMAX Live are the names of products you already own. AgWaterAI is a separate company, not affiliated with their maker, and reads only the data you authorize.
