Skip to main content
New: Groundwater program in developmentFor growersFor water sponsors
AgWaterAI

Free trial

Free water position check

Know your groundwater allocation position every week.

Start with a free check. Tell us your GSA, your acres, your crop and how your water is measured: meters, pump records or satellite. We’ll show you where you stand against your allocation, and what any water over it would cost at your GSA’s adopted rate.

AgWaterAI customers see that position every week once their meter or pump records are connected.

ESTIMATE ONLY. Verify with your GSA. This is not a bill, a compliance determination or an irrigation recommendation.

Start your free check

What you get back

Your position
Water used so far in your GSA’s accounting year, against your allocation, in acre-feet.
The cost of any excess
If you are over, what the excess would cost at the rate your GSA has adopted, with a link to where that rate is published. If your GSA has not adopted a rate, we tell you so instead of guessing.
How we worked it out
Which records we used and how, so you or your agronomist can check every number.

How it works

  1. Send the basics

    Your GSA, acres, crop and how your water is measured. There is nothing to upload on this page.

  2. We follow up privately

    We reply by email and agree a private way for you to share meter totals, pump records or your GSA statement.

  3. Get your check

    Your position, the cost of any excess at your GSA’s adopted rate, and the method behind both. Free, with no obligation.

Request your free check

We reply by email to set up the next step.

As it appears on your allocation notice or bill. Not sure? Enter your county and we will work it out.

How is your water measured?

ESTIMATE ONLY. Verify with your GSA. This is not a bill, a compliance determination or an irrigation recommendation.

Please don’t send records or account numbers through this page; we will agree a private way to share them. We use these details to reply about your check. Privacy policy

Want to run the numbers yourself?

Our free SGMA estimator uses your GSA’s published schedule where one is on file.

Open the SGMA estimator

AgWaterAI is irrigation decision software that shows permanent-crop growers their water use against their groundwater allocation each week, built on proprietary field data and delivered through the grower's own crop adviser.