Skip to main content

For growers on Sentek probes

Already on Sentek probes? Connect your IrriMAX Live account.

Sample: one Sentek probe, two logger days, read from the grower's own IrriMAX Live account.Sample
Readings in the sealed record this week96

Every Monday, the week on your probes in one email: what to do this week in order, which blocks to irrigate first, which to take a stem water potential (SWP) reading on, which to walk, the weather and ETo ahead, your water budget, the sensors that need attention, and what to trust this week. Thursday brings a draft water order your adviser makes the call on, where our agronomist’s past orders for your blocks are loaded into the draft’s rules. Probe readings are sealed into a signed record where daily sealing runs.

You keep your probes, crew and adviser.

Sentek and IrriMAX Live are the names of products you already own. AgWaterAI is a separate company, not affiliated with their maker, and reads only the data you authorize.

Your week, on your probes

Monday
Which blocks to take an SWP reading on first this week.
Thursday
The draft water order, where our agronomist’s past orders for your blocks are loaded into the draft’s rules. Your adviser makes the call.
Every day
Probe readings sealed into the record once each logger day closes.

Nothing we send controls a pump or a valve. Your IrriMAX Live account stays as it is.

What you get on Platform

Three trained models run every week. Two estimate crop stress and one estimates the hours each block’s pump ran. The stress models have not beaten the simple rules a grower already has, such as the block’s latest SWP reading. The Thursday draft water order comes from rules mined from our agronomist’s past orders for each block; it does not read that week’s weather, sensor data or any model.

A trained model projects each probe’s soil moisture three days ahead if no irrigation or rain occurs. For probes with their own history, on a farm it was never fitted on, it was closer three days ahead than assuming the soil stays where it is and than every other plain rule tested: about seven tenths of the best one’s miss. For a brand-new probe a plain rule does as well or better. Tested in periods when the probe saw no wetting, on one farm and one probe make, on past data that had been scored before. With that farm’s locations weighted equally, the model’s lead over the best plain rule is not clear. With irrigated periods removed the lead held; most remaining periods could not be checked, and on checked dry ones it is unclear. The next check, on new days, is scored November 23, 2026. A projection, not a call to irrigate.

Platform

$20an acre a yearon the probes you already own

20-acre minimum. Your own crew and adviser.

Platform, on your existing probes: free for 90 days from when your probe data connects. Then $20 per acre per year, 20-acre minimum. The paid plan starts the day after your free period ends unless you cancel in writing before it ends. For October to December signups, the free period ends on March 31 or 90 days after your probes start sending usable data, whichever is later.

You keep ownership of your raw data. Read the data terms

The Monday list

Once your blocks have a season of their own stem water potential (SWP) readings: which blocks to take a reading on first each week, from each block's own reading record. Every SWP reading your adviser takes sharpens the Monday list and the block’s record. A farm with no readings starts with the three-day soil projection on each probe, once the probe has logged a wetting.

The Thursday draft order

A Thursday draft needs our agronomist’s past water orders for each block loaded into its rules, so a farm without them does not get one, and it gives numbers only for the months those orders cover. A farm without them starts with the Monday briefing on its probes, the soil projection on each probe once the probe has logged a wetting, and the sealed record where daily sealing runs. On Platform, your own Certified Crop Adviser or adviser reviews the draft and makes the call. Nothing we send controls a pump or a valve.

The sealed record

Probe readings are sealed into a signed, tamper-evident chain once each logger day closes, on the sites where daily sealing runs today. Each issued water order is kept with the readings behind it; the order itself is not signed. A signature shows a record has not changed since signing; it does not prove a measurement was correct.

Alerts worth checking

A missed set, judged against the block's own last four weeks. A block that is dry and overdue. A probe that stops reporting. Each one is a reason to check, not a verdict. The missed-set alert needs the block's own pump records; the dry-and-overdue alert needs a season of probe history.

Water use against your allocation, every week

Allocation, water used, and what a shortfall would cost, by farm. Measured where a meter feeds it, a labeled estimate where it does not.

The monthly groundwater meter record

On the 1st, every meter's total, flow and days reported, from your own meters, as a CSV for your file and for the reviewer, with a code your GSA can use to read the record.

Heat advisories, the grower app with Scout, and the emails

Heat-wave alerts by email when the forecast triggers one, and the grower app with Scout, the assistant that writes the summary. Scout answers from your own sensors and briefings and never enters the irrigation decision.

Your probes stay yours

Your IrriMAX Live account, probes and subscription stay as they are. Starting the Platform trial also starts our data terms. You keep ownership of your raw data. Clearing the key in IrriMAX Live stops data access. Cancelling the trial requires written notice under the trial terms.

Three steps

How connecting works

  1. 1

    Send the connect request below.

    It takes your farm and contact details, the email on your IrriMAX Live account, and your authorization. We reply by email with a private link to the form for the key.

  2. 2

    Generate an API key under Settings in your IrriMAX Live account and paste it into the private form we send.

    IrriMAX Live lets the account holder set, change or clear its automatically generated key on the Settings page. The private link is valid for seven days. The form takes the key, who is entering it (you or your dealer) and your authorization, then shows you the probes the key reaches so you can confirm they are yours. Enter the key only in that form. This page never asks for a password or an API key, and neither should an email or a text.

  3. 3

    Your blocks appear on the Monday briefing and the sealed record.

    Once the first probe readings arrive, your blocks are on the Monday briefing and the sealed record. The Monday list needs a season of the farm’s own SWP readings. A farm with no readings does not get it. A Thursday draft needs our agronomist’s past orders for each block loaded into the draft’s rules. Free for 90 days from when your probe data connects. The paid plan starts the day after your free period ends unless you cancel in writing before it ends. For October to December signups, the free period ends on March 31 or 90 days after your probes start sending usable data, whichever is later.

Send the connect request

For dealers who sell or service Sentek probes

Register your grower first

If you sell or service the probes, register your grower at the referral program page before the first meeting. Platform referrals pay $3 an acre a year for as long as the grower stays, and the grower connects here.

See the partner card

Never a password, never a key on this page

The request below takes your farm and contact details, your IrriMAX Live account email, and your authorization. The API key goes only on the private form we send afterwards. You can clear the key in IrriMAX Live whenever you choose.

Questions growers ask

Does AgWaterAI replace IrriMAX Live?
No. AgWaterAI reads it. Your IrriMAX Live account, your probes and your subscription stay as they are. AgWaterAI imports the readings you authorize through the IrriMAX Live API and adds the Monday briefing and the sealed record, the Monday list once your blocks have a season of their own SWP readings, and a Thursday draft where our agronomist’s past orders for your blocks are loaded into the draft’s rules.
Who owns the data?
You keep ownership of your raw data under AgWaterAI's standard agreement. IrriMAX Live's licence agreement, clause 12.1, says the data you upload remains your property, including derivative works. These are separate agreements. AgWaterAI reads the data you authorize. Clearing the key in IrriMAX Live stops that access.
Do I need AgWaterAI sensors?
No. Platform runs on the probes you already own. Managed, the plan with sensors we install and our own crew, is a separate choice on the pricing page.
Is AgWaterAI connected with Sentek?
No. Sentek and IrriMAX Live are the names of products you already own. AgWaterAI is a separate company that reads the data you authorize through the IrriMAX Live API, which its help pages describe as intended for third-party services that import data.

Connect your account

Tell us the email on your IrriMAX Live account. We reply with the private form for the key and the one-step instructions for generating it.

The sign-in email on the account that holds your probes. Not the password.
The dealer who sold or services your probes, if you have one.

This page never asks for a password or an API key. We use these details to reply about connecting your account. Privacy policy

Questions? Email info@agwaterai.com.

This page describes Platform as of November 2, 2026; the signed agreement governs. Sending the request does not start the Platform trial. The trial starts when your probe data connects, and the data terms apply when the trial starts. No probe data is read until you share the key through the private form.